INCH-POUND
MIL-PRF-21038/27E
8 July 1998
SUPERSEDING
MIL-T-21038/27D
17 October 1994
PERFORMANCE SPECIFICATION SHEET
TRANSFORMERS, PULSE, LOW POWER
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the products described herein
shall consist of this specification and MIL-PRF-21038.
REQUIREMENTS:
Dimensions and configuration: See figure 1 and table 1.
Operating temperature: -55°C to +130°C.
Case: The case shall be nonmetallic (e.g., epoxy).
Weight: 5 grams, maximum.
Terminal strength: Method 211 of MIL-STD-202, test condition A, 2 pounds applied force.
Terminals: Solderable printed circuit type terminals, see figure 1.
Electrical characteristics:
Turns ratio: See table I.
Common mode rejection (CMR): In accordance with table 1 when tested as specified on figure 2.
Pulse width of output: 2 microseconds nominal. The transformers shall be tested as specified on
figure 3.
Overshoot and ringing: ±1 volt maximum. The transformers shall be tested as specified on figure 3
with the resulting waveform shown on figure 4.
Droop: In accordance with table I when tested as specified on figure 3 with the resulting waveform
shown on figure 4.
AMSC N/A
1 of 13
FSC 5950
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business