INCH-POUND
MIL-PRF-27/337E
25 July 2008
SUPERSEDING
MIL-PRF-27/337D
22 January 1992
PERFORMANCE SPECIFICATION SHEET
TRANSFORMERS, POWER, 150 AND 200 VOLTAMPERES, 400 HZ
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The complete requirements for procuring the transformer described herein shall consist of this
document and the latest issue of specification MIL-PRF-27.
Inches
mm
A
2.81 ±.02
71.4 ±.5
Inches
mm
B
2.12 ±.02
53.8 ±.5
.02
0.5
C
2.43 ±.02
61.7 ±.5
.09
1.3
D
2.21 ±.02
56.1 ±.5
.30
7.6
E
1.52 ±.02
38.6 ±.5
.40
10.2
F
0.30 ±.04
7.6 ±1.0
H
2.23 ±.04
56.6 ±1.0
J
0.40 ±.04
10.2 ±1.0
K
.164-32 UNC 2B
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information.
3. Marking shall be on top and sides of case.
4. Dimensional tolerance shall be ±.02 unless otherwise specified.
5. For series output, connect terminals 4 and 5 together. For parallel
output, connect pins 3 to 4 and 5 to 6.
FIGURE 1. Dimensions and configuration.
AMSC N/A
FSC 5950
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business