MIL-PRF-39010/7F
TABLE II. Electrical characteristics (final). 1/
Allowable variation from
Allowable percent from specified
Inspection
initial measurement
minimum value in electrical
group
characteristics (initial) table
Inductance
DC resistance
Self-resonant
Q
(percent)
frequency
Qualification
inspection
±2
Group II
-10
±(3% +.001 ohm)
±5
2/
Group IV
-10
±(2% +.001 ohm)
±5
2/
Group V
-15
Quality
conformance
inspection
Group B
±(2% +.001 ohm)
±5
2/
-15
Subgroup 1
±2
-10
Subgroup 3
±(3% +.001 ohm)
±5
-10
2/
Subgroup 4
1/ Test fixture allowance of +.01 μH shall be added to all change in inductance limits ±( _ percent
+.01 μH).
2/ The self-resonant frequency shall be not less than the value specified in table I.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate
where changes from the previous issue were made. This was done as a convenience only and the
Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and
contractors are cautioned to evaluate the requirements of this document based on the entire content
irrespective of the marginal notations and relationship to the last previous issue.
Referenced documents.
MIL-PRF-39010
MIL-STD-202
Custodians:
Preparing activity:
Army - CR
Army - CR
Navy - EC
Air Force - 11
Agent:
DLA - CC
Review activities:
Army - AR, CR4, MI
Project 5950-2008-002
Navy - AS, CG, MC, OS, SH
Air Force - 19, 99
DLA CC
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above
using the ASSIST Online database at https://assist.daps.dla.mil.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business