MIL-T-27/1608
REQUIREMENTS: (When numbers in parentheses, such as (1-2) are used, they indicate the winding and the extreme terminals of the winding.)
Electrical ratings: See table I.
Inductance (1-2): 1.0 H, minimum. Voltage (1-2): 10 volts, 60 Hz. Current (1-2): 200 mA dc.
DC resistance (1-2): 69 ohms, maximum. Working voltage (Peak): 1,070 volts. Power: 2.2 watts
Design and construction:
Dimensions and configuration: See figure 1. Duty cycle: Continuous.
Case: Encapsulated.
Material: Epoxy.
Terminals: Solder terminal, Malco No 1472 or equivalent. Height: .312 ±.016 inch (7.92 ±0.41 mm).
Weight: 408 grams, maximum. Altitude: 70,000 feet, maximum.
Operating temperature range: -55°C to +130°C.
Terminal strength: MIL-STD-202, method 211, test condition A, 5.0 pounds. Vibration (high frequency): MIL-STD-202, method 204.
Dielectric withstanding voltage: At sea level: 2,500 volts rms.
At barometric pressure: 1,337.5 volts rms. Electrical characteristics:
Inductance: With 10 volts, 60 Hz across (1-2), and 200 mA dc applied to (1-2) the inductance shall be 1.0 H minimum.
Temperature rise: 45°C with 10 volts, 60 Hz, 200 mA dc applied to (1-2) at an ambient temperature of 85°C. Marking location: See figure 1.
Part or Identification Number (PIN): M27/160-01.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business