MIL-T-27/163D
Inches |
mm |
.005 |
0.13 |
.010 |
0.25 |
.040 |
1.02 |
.062 |
1.57 |
.164 |
4.17 |
.250 |
6.35 |
.375 |
9.32 |
.844 |
21.44 |
1.400 |
35.56 |
1.844 |
46.84 |
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Marking shall be on the side of the case opposite terminal pins.
4. Electrical values shall be marked as specified in table I as applicable.
5. Insert is located on bottom of the inductor with the terminals.
FIGURE 1. Dimensions and configurations - Continued.
REQUIREMENTS: (When numbers in parentheses, i.e., (1-2) are used, they indicate the winding and the extreme terminals of the windings.)
Electrical ratings:
Working voltage (peak): 350 volts.
Temperature coefficient (-55°C to +105°C): ±1.5 percent. Design and construction:
Dimensions and configuration: See figure 1. Case: Encapsulated.
Material: Epoxy.
Terminals: Type N-4, tin-lead plated, in accordance with MIL-STD-1276. Diameter: .040 inch, ±.005.
Length: .375 inch, ±.062. Weight: 170 grams, maximum.
Operating temperature range: -55°C to +105°C.
Terminal strength: MIL-STD-202, method 211, test condition A, 2 pounds.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business