MIL-T-27/291C
DC resistance: (17-18): .67 ohm maximum. (1-2), (3-4), (5-6), (7-8), (9-10), (11-12), (13-14), (15-16): 2.81 ohms maximum each.
Polarity: Additive, with terminals 18 and 1, 2 and 3, 4 and 5, 6 and 7, 8 and 9; 10 and 11, 12 and 13, and 14 and 15, connected.
Temperature rise: 50°C with 52 volts peak, 17 kHz across (17-18) at an ambient temperature of
65°C.
Vibration, high frequency: MIL-STD-202, method 204, test condition A. Shock (specified pulse): MIL-STD-202, method 213, test condition H. VERIFICATION:
Qualification inspection: Not applicable for this specification sheet.
Conformance inspection: Groups A and B tests of MIL-PRF-27 shall be applicable. Marking location: See figure 1.
Part or Identifying Number (PIN): M27/291-01.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
Referenced documents. In addition to MIL-PRF-27, this document references the following: MIL-STD-202
Custodians: Preparing activity: Army - CR DLA - CC
Navy - EC
Air Force - 85
DLA - CC
Review activities: Army - AR, MI
Navy - AS, MC, OS, SH Air Force - 19, 99
(Project 5950-2009-089)
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https://assist.daps.dla.mil .
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business