INCH-POUND
MIL-T-27/295C
8 June 2012
SUPERSEDING MIL-T-27/2958
20 April 1993
MILITARY SPECIFICATION SHEET
TRANSFORMER, POWER, STEP-DOWN
Inactive for new design after 20 April 1993.
This specification is approved for use by all Depart- ments and Agencies of the Department of Defense.
The complete requirements for acquiring the products described herein shall consist of this document and the latest issue of specification MIL-PRF-27.
WV: 443 V MAX
ALTITUDE: 10,000 FT MAX
CIRCUIT DIAGRAM AND MARKING
NOTES:
1.Dimensions are in inches.
2.Metric equivalents are given for information only.
3.Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three-place decimals and ±.03 (0.8 mm) for two-place decimals.
4.Tolerance on terminal position dimensions is ±.015 (0.38 mm).
5.Marking shall be on the top of the case.
6.Terminal numbers are not required. Terminal number 2 is indicated by white dot as shown.
FIGURE 1. Dimensions and configurations.
AMSC N/A FSC 5950
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business