MIL-T-27/3B
Polarity: Additive, with terminals 3 and 4, and 6 and 7 connected.
Temperature rise: 40°C maximum, above an ambient of 65°C, with rated power at 300 Hz. Vibration (High frequency): MIL-STD-202, method 204, test condition B.
Shock (specified pulse): MIL-STD-202, method 213, test condition I. Part or Identifying Number (PIN):
M 27/3-01 A or B
MIL specification |
Specification |
Dash |
Stud mounting |
Insert mounting |
|
item |
sheet no. |
no. |
(For cross reference of MS PIN to military PIN, see table I.)
TABLE I. Cross reference.
Mounting |
MS9000 |
M27/3 |
||
Dash no. |
Type designation |
Dash no. |
Type designation |
|
Studs |
-A |
TF4RX13AJ001 |
-01A |
TF4R21AJ |
Inserts |
-B |
TF4RX13AJ001 |
-01B |
TF4R21AJ |
NOTE: Qualification approval to MIL-T-27/3 shall be sufficient to grant qualification approval to
MIL-T-27/4 through MIL-T-27/6.
Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue.
Referenced documents. In addition to MIL-PRF-27, this document references the following: MIL-STD-202.
Custodians: Preparing activity: Army - CR DLA - CC
Navy - EC
Air Force - 85 (Project 5950-2009-015) DLA - CC
Review activities: Army - AR, CR4
Navy - AS, MC
Air Force - 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.daps.dla.mil.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business