MIL-T-27/86A
REQUIREMENTS: (When numbers in parentheses, i.e. (1.-3) are used, they indicate the winding and the extreme terminals of the winding.)
Electrical ratings:
Inductance (1-2): 50 µH minimum. Voltage (1-2): 0.2 V rms, 10 kHz. Power: 0.063 watt.
Current (1-2): 0.5 ampere dc.
DC resistance (1-2): 0.25 ohm maximum. Working voltage: 50 V maximum.
Design and construction:
Dimensions and configuration: See figure 1. Duty cycle: Continuous.
Case: Encapsulated.
Material: Epoxy.
Terminals: Solid wire lead type, tinned nickel. Weight: 1.1 grams maximum.
Operating temperature range: -55°C to +130°C.
Terminal strength: MIL-STD-202, method 211, test condition A, 2 pounds. Terminal twist: MIL-STD-202, method 211, test condition D.
Dielectric withstanding voltage (at sea level): 100 volts rms. Electrical characteristics:
Inductance: With 0.2 Vrms, 10 kHz across, and 0.5 ampere dc applied to (1-2) the inductance shall be
50 µH minimum.
DC resistance: 0.25 ohm across (1-2) maximum. VERIFICATION:
Qualification inspection: Not applicable for this specification sheet.
Quality conformance inspection: Groups A and B tests of MIL-PRF-27 shall be applicable. Marking location: See figure 1.
Part or Identifying Number (PIN): M27/86-01.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business