MS18130F
TABLE I. Electrical characteristics (initial).
Dash number 1/ 2/ |
Type designation |
Superseded MS PIN |
Inductance (µH) |
Q (min) |
Test frequency (MHz) |
SRF min (MHz) |
DC resistance (ohms) |
Rated dc current (mA) |
-1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 |
LT4K074 LT4K075 LT4K076 LT4K077 LT4K078 LT4K079 LT4K080 LT4K081 LT4K082 LT4K083 LT4K084 LT4K085 LT4K086 LT4K087 LT4K088 LT4K089 |
MS16225-1 MS16225-2 MS16225-3 MS16225-4 MS16225-5 MS16225-6 MS16225-7 MS16225-8 MS16225-9 MS16225-10 MS16225-11 MS16225-12 MS16225-13 MS16225-14 MS16225-15 MS16225-16 |
0.15 ±20% 0.22 ±20% 0.33 ±20% 0.47 ±20% 0.56 ±10% 0.68 ±10% 0.82 ±10% 1.00 ±10% 1.20 ±10% 1.50 ±10% 1.80 ±10% 2.20 ±10% 2.70 ±10% 3.30 ±10% 3.90 ±10% 4.70 ±10% |
50 50 45 45 50 50 50 50 33 33 33 33 33 33 33 33 |
25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 |
525 450 360 310 280 250 220 200 180 160 150 135 120 110 100 90 |
.03 .055 .09 .12 .135 .15 .22 .29 .42 .50 .65 .95 1.20 2.00 2.30 2.60 |
2,450 1,810 1,400 1,225 1,150 1,100 900 785 650 600 525 435 385 300 280 260 |
1/ The dash number added to MS military standard number constitutes the MS PIN; for example MS18130-1.
2/ The former MS PIN's MS18130-17 through MS18130-26 have been superseded by MS14046-1 through
MS14046-10, respectively.
TABLE II. Electrical characteristics (final). 1/
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV 2/ |
±2 ±5 ±5 |
--- ±(3% +.001 ohm) ±(2% +.001 ohm) |
--- -8 -10 |
-10 -10 -15 |
Conformance inspection group C Subgroup I Subgroup II 2/ Subgroup III |
±2 ±5 ±5 |
--- ±(2% +.001 ohm) ±(3% +.001 ohm) |
--- -10 -8 |
-10 -15 -10 |
1/ Test fixture allowance of +.01 µH shall be added to all change in inductance limits ±( _ percent +.01 µH).
2/ The polarizing voltage during the moisture resistance tests Is applied with the positive lead connected to the coil terminals tied together, and the negative lead connected to the metal strap.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business