MS21381E
2/ Former MS part numbers MS21381-37 through MS21381-73 have been superseded by MS21402-1 through
MS21402-37, respectively.
TABLE II. Electrical characteristics (final).
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) 1/ |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV 2/ |
±2 ±5 ±5 |
--- ±(3% +.001 ohm) ±(2% +.001 ohm) |
--- -8 -10 |
-10 -10 -10 |
Conformance inspection group C Subgroup I Subgroup II Subgroup III |
±2 ±5 ±5 |
--- ±(2% +.001 ohm) ±(3% +.001 ohm) |
--- -10 -8 |
-10 -10 -10 |
1/ Initial inductance shall consist of testing the variable for inductance range; equal to or less than MIN. L and equal to or more than MAX. L.
The variable shall then be set to the nominal inductance.
The remaining applicable electrical characteristics shall be read without readjusting the unit.
Allowable variation from initial inductance shall be the percent change between nominal inductance and the final inductance reading.
The variable shall not be reset or adjusted between initial and final inductance tests.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business