MS75008F
TABLE 1. Electrical characteristics (initial).
Dash Number MS75008 |
Type designation |
Inductance (µH) |
Q Min. |
Test Frequency (MHz) |
SRF Minimum (MHz) |
DC resistance max (Ohms) |
Rated DC current, maximum (mA) |
-21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 |
LT4K027 LT4K028 LT4K029 LT4K030 LT4K031 LT4K032 LT4K033 LT4K034 LT4K035 LT4K036 LT4K037 LT4K038 LT4K039 |
0.15 ±20% 0.22 ±20% 0.33 ±20% 0.47 ±20% 0.56 ±10% 0.68 ±10% 0.82 ±10% 1.00 ±10% 1.20 ±10% 1.50 ±10% 1.80 ±10% 2.20 ±10% 2.70 ±10% |
55 50 50 50 50 45 40 40 30 30 30 30 30 |
25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 |
510 415 350 300 270 250 210 200 180 170 150 140 120 |
0.030 0.035 0.065 0.085 0.125 0.150 0.205 0.290 0.400 0.485 0.740 0.970 1.20 |
3,000 2,800 2,000 1,700 1,450 1,300 1,100 930 785 700 580 505 460 |
TABLE II. Electrical characteristics (final).
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV |
±2 ±5 ±5 |
--- ±(3% +.001 ohm) ±(2% +.001 ohm) |
--- -8 -10 |
-10 -10 -15 |
Conformance inspection group C Subgroup I Subgroup II Subgroup III |
±2 ±5 ±5 |
--- ±(2% +.001 ohm) ±(3% +.001 ohm) |
--- -10 -8 |
-10 -15 -10 |
Application notes:
1. The polarization voltage during moisture the moisture resistance tests is applied with the positive lead
Connected to the coil terminals tied together, and the negative lead connected to the metal strap.
2. Former MS part numbers MS75008-34 through MS75008-45 have been superseded by MS75101-1 through MS75101-12, respectively.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business