MS75084E
TABLE 1. Electrical characteristics (initial).
Dash Number MS75084 |
Type Designa- tion |
Inductance (µH) ±10% |
Q Min. |
Test Frequency (L and Q) (MHz) |
SRF Minimum (MHz) |
DC resistance (25qC) maximum (Ohms) |
Rated DC current, (mA) 1/ |
-1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 |
LT10K061 LT10K062 LT10K063 LT10K064 LT10K065 LT10K066 LT10K067 LT10K068 LT10K069 LT10K070 LT10K071 LT10K072 LT10K073 LT10K074 LT10K075 LT10K076 LT10K077 |
1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 |
25 28 30 30 37 45 45 45 50 50 55 55 45 40 50 50 50 |
7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 |
150 140 125 115 100 90 80 75 65 60 55 50 40 35 30 25 20 |
.18 .22 .30 .40 .55 .85 1.00 1.20 1.80 2.00 2.70 3.70 2.70 2.80 3.10 3.30 3.50 |
590 535 455 395 355 270 250 230 185 175 155 130 155 150 145 140 135 |
1/ For the overload test, direct current shall be used. The value of this current shall be
1.5 times the rated dc current.
TABLE II. Electrical characteristics (final). 1/
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV |
±2 ±5 ±5 |
--- ±(3% +.001 ohm) ±(2% +.001 ohm) |
--- -8 -10 |
-10 -10 -15 |
Conformance inspection group C Subgroup I Subgroup II Subgroup III |
±2 ±5 ±5 |
--- ±(2% +.001 ohm) ±(3% +.001 ohm) |
--- -10 -8 |
-10 -15 -10 |
1/ Test fixture allowance of +.01µH shall be added to all change in inductance limits ±( _ percent +.01 µH).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business