MS75085E
TABLE 1. Electrical characteristics (initial).
Dash Number MS75085 |
Type Designa- tion |
Inductance (µH) ±10% |
Q Min. |
Test Frequency (L and Q) (MHz) |
SRF Minimum (MHz) |
DC resistance (25qC) max (Ohms) |
Rated DC current, (mA) |
-1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 |
LT10K078 LT10K079 LT10K080 LT10K081 LT10K082 LT10K083 LT10K084 LT10K085 LT10K086 LT10K087 LT10K088 LT10K089 LT10K090 LT10K091 LT10K092 LT10K093 LT10K094 LT10K095 LT10K096 |
33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 |
45 45 45 45 50 50 50 30 30 30 30 30 30 30 30 30 30 30 30 |
2.5 2.5 2.5 2.5 2.5 2.5 2.5 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 .79 |
24 22 20 18 15 14 13 12 11 10 9 8 7 6.5 6 5 4 3.8 3.4 |
3.4 3.6 4.5 5.7 6.7 7.3 8 13 15 17 21 25 28 35 42 46 60 65 72 |
130 125 110 100 92 88 84 66 61 57 52 47 45 40 36 35 30 29 28 |
TABLE II. Electrical characteristics (final). 1/
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV |
±2 ±10 ±5 |
--- ±(5% +.001 ohm) ±(2% +.001 ohm) |
--- 15 -10 |
-10 -20 -15 |
Conformance inspection group C Subgroup I Subgroup II Subgroup III |
±2 ±5 ±10 |
--- ±(2% +.001 ohm) ±(5% +.001 ohm) |
--- -10 -15 |
-10 -15 -20 |
1/ Test fixture allowance of +.01µH shall be added to all change in inductance limits ±( _ percent +.01 µH).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business