MS75088D
TABLE 1. Electrical characteristics (initial).
1/ Dash Number MS75088 |
Type Designation |
Inductance (µH) ±10% |
Q (min) |
Test Frequency (MHz) |
SRF Minimum (MHz) |
DC resistance (ohms) |
Rated DC current (mA) |
-1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 |
LT10K203 LT10K204 LT10K205 LT10K206 LT10K207 LT10K208 LT10K209 LT10K210 LT10K211 LT10K212 LT10K213 LT10K214 LT10K215 LT10K216 |
1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 12.0 |
44 44 44 44 44 44 44 44 44 44 50 50 50 55 |
25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 |
140 130 115 105 100 92 85 75 70 65 55 50 46 44 |
.07 .10 .12 .14 .19 .28 .35 .40 .55 .72 1.02 1.32 1.62 2.00 |
1,070 895 815 775 650 535 480 450 380 335 280 250 220 200 |
1/ The coils specified herein are substitutes for the inactive coils on MS90537, providing the small decrease in physical dimensions are not a factor. The decrease in maximum operating temperature from 125°C
to 105°C does not downgrade these coils but assures satisfactory operation at 105°C for a minimum of
2,000 hours of life, rather than a shorter period of operation at 125°C.
TABLE II. Electrical characteristics (final). 1/
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV |
±5 ±5 ±5 |
--- ±(3% +.001 ohm) ±(2% +.001 ohm) |
--- -8 -5 |
-10 -10 -10 |
Conformance inspection group C Subgroup I Subgroup II Subgroup III |
±5 ±5 ±5 |
--- ±(2% +.001 ohm) ±(3% +.001 ohm) |
--- -5 -8 |
-10 -10 -10 |
1/ Test fixture allowance of +.01µH shall be added to all change in inductance limits ±( _ percent +.01 µH).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business