MS90538C
TABLE I. Electrical characteristics (initial).
Dash Number MS90538 |
Type designation |
Inductance (µH) ±5% |
Q Min. |
Test frequency (MHz) |
SRF Minimum (MHz) |
DC resistance max (Ohms) |
Rated DC current, (mA) |
-01 -02 -03 -04 -05 -06 -07 -08 -09 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 |
LT10K001 LT10K002 LT10K003 LT10K004 LT10K005 LT10K006 LT10K007 LT10K008 LT10K009 LT10K010 LT10K011 LT10K012 LT10K013 LT10K014 LT10K015 LT10K016 LT10K017 LT10K018 LT10K019 LT10K020 LT10K021 |
36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 |
60 60 60 55 55 55 55 55 55 50 50 50 60 65 65 65 65 65 65 65 65 |
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 .79 .79 .79 .79 .79 .79 .79 .79 .79 |
15.5 14.5 13.7 13.0 12.7 12.0 11.5 11.0 10.5 10.3 10.0 9.5 8.9 8.7 8.5 8.0 7.5 7.0 6.5 6.2 5.9 |
2.50 2.60 2.70 2.75 2.85 3.00 3.15 3.30 3.70 3.90 4.30 4.50 4.90 5.20 5.45 6.05 6.40 6.75 7.10 7.45 7.80 |
180 176 172 170 167 164 160 156 147 143 136 133 128 124 121 114 111 108 106 103 101 |
TABLE II. Electrical characteristics (final). 1/
Inspection group |
Allowable variation from Initial measurement |
Allowable percent from specified minimum value in electrical characteristics (initial) table |
||
Inductance (percent) |
DC resistance |
Self-resonant frequency |
Q |
|
Qualification inspection Group II Group III Group IV |
±2 ±5 ±5 |
--- ±(3% +.001 ohm) ±(2% +.001 ohm) |
--- -8 -10 |
-10 -10 -15 |
Conformance inspection group C Subgroup I Subgroup II Subgroup III |
±2 ±5 ±5 |
--- ±(2% +.001 ohm) ±(3% +.001 ohm) |
--- -10 -8 |
-10 -15 -10 |
1/ Test fixture allowance of +.01µH shall be added to all change in inductance limits ±( _ percent +.01 µH).
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business