MIL-PRF-27/2G
REQUIREMENTS: (When numbers in parentheses, i.e., (1-2) are used, they indicate the winding and the
extreme terminals of the winding.)
Electrical rating:
Primary power level: 2 W at 1 kHz.
Working voltage (peak): 50 volts.
Design, configuration, and physical dimensions: See figure 1.
Material: Metal encased, steel.
Weight: 4 ounces, maximum.
Duty cycle: Continuous.
Terminal: Solder lug, number 18 AWG, stand-off type.
Temperature range: See table I.
Terminal strength: Method 211 of MIL-STD-202, test condition A, 5 pounds.
Dielectric withstanding voltage: Method 201 of MIL-STD-202; test voltage, 500 V rms.
Electric characteristics:
Harmonic distortion: Not more than 1 percent at 2 W 1 dB at 1 kHz.
Primary impedance: 600 60 ohms (1-2).
Secondary load impedance: 8 1 ohms (3-4).
DC resistance (DCR):
Primary DCR: 25 ohms 25 percent.
Secondary DCR: 0.48 ohm 25 percent.
Frequency response:
Range: 250 Hz to 5,000 Hz at rated power, flat within 2 dB; reference frequency 1 kHz;
test voltage 34.6 V rms (1-2).
Insertion loss: 0.5 dB maximum, with 2 W input at 1 kHz.
Polarity: Additive, with terminals 2 and 3 connected.
Temperature rise: See table I.
Vibration, high frequency: Method 204, test condition B.
Shock (specified pulse): Method 213, test condition H.
Part or identifying number (PIN): M27/2-(dash number from table I).
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business