MIL-DTL-28778A
DEPARTMENT OF DEFENSE SPECIFICATION
- Enamel, Equipment, Light-Gray, (NAVY Formula No. 111)
- Plastic Sheet, Laminated
- Plastic-Material, Laminated Thermosetting, Sheets, Nylon Fabric Base,
Phenolic-Resin
- Plastic Material, Laminated, Thermosetting, Electrical Insulation; Sheets Class
Cloth, Silicone Resin
DEPARTMENT OF DEFENSE STANDARDS
- Identification Marking of US Military Property
- Test Methods for Electronic and Electrical Component Parts
- Environmental Test Methods
- Marking of Electrical and Electronic Parts
DEPARTMENT OF DEFENSE HANDBOOKS
- Standard General Requirements for Electronic Equipment
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this specification to the extent
specified herein. Unless otherwise specified, the issues of the documents that are DoD adopted are those listed in
the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the
DODISS are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS
- Plastic Sheet and Insulation Sheet, Electrical (Laminated, Thermosetting, Paper-Base,
Phenolic-Resin)
- Molding Plastics and Molded Plastic Parts, Thermosetting
(Copies of these documents are available online at https://www.astm.org from the American Society for testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA, 19428-2959.)
IPC ASSOCIATION CONECTING ELECTRONIC INDUSTRIES
J-STD-004 - Requirements for Soldering Fluxes.
J-STD-005 - Requirements for Soldering Paste.
J-STD-006 - Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solder Solders for
Electronic Soldering Applications.
(Copies of these documents are available online at https://www.ipc.org or from the Association Connecting
Electronics Industries, 2215 Sanders Road, Northbrook, IL 60062-6135, United States.)
NATIONAL BUREAU OF STANDARDS
Handbook H28 Screw-Thread Standards for Federal Services.
(Application for copies should be addressed to the Superintendent of Documents, Government Printing Office,
Washington, D.C. 20025.)
NATIONAL ELECTRICAL MANUIFACTURERS ASSOCIATION
MW 1000 - Magnet Wire.
TR 1-1993 - Transformer, Regulators, and Reactors.
(Copies of these documents may be purchased from the National Electrical Manufacturers Association, 1300 North
th
17 Street, Suite 1847, Rosslyn, VA, United States, 22209. https://nema.org )
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business