MIL-STD-981C
NATIONAL CONFERENCE OF STANDARDS LABORITORIES (NCSL)
NCSL Z540.3 - Calibration Laboratories and Measuring and Test Equipment - General
Requirements.
(Copies of these documents can be obtained online at https://www.ncsli.org or by contacting National
Conference of Standards Laboratories, 2995 Wilderness Place, Suite 107, Boulder, CO, 80301-5404.) AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/NEMA MW-1000 - Magnet Wire.
ISO 10012 - Quality Assurance Requirements for Measuring Equipment - Part 1: Meterological Confirmation System for Measuring Equipment.
(Copies of these documents can be obtained online at https://www.ansi.org or by contacting American
National Standards Institute, 1819 L Street NW, Suite 600, Washington, DC 20036). AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM-E-595 - Standard Test Method for Total Mass Loss and Collected Volatile
Condensable Material from Outgassing in a Vacuum Environment. ASTM-D-2240 - Standard Test Method for Rubber Property-Durometer Hardness
(Application for copies should be addressed to the American Society for Testing and Materials (ASTM),
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or https://www.astm.org/
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)
NASA-STD-8739.3 - Workmanship Standard for Soldered Electrical Connections. NASA-STD-8739.4 - Crimping, Interconnecting Cables Harness, and Wiring.
(Copies of these documents are available online at https://standards.nasa.gov/documents/nasa
STANFORD APPLIED ENGINEERING (SAE) INTERNATIONAL
SAE-AS22759 - Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy
(Copies of these documents are available online at https://www.sae.org/ or from SAE World
Headquarters, 400 Commonwealth Drive, Warrendale PA 15096-0001.)
(Non-Government standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.)
2.4 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. DEFINITIONS
3.1 Definitions. The meaning of terms used in this standard are in accordance with MIL-PRF-27, MIL-PRF-15305, MIL-PRF-21038, MIL-T-55631, MIL-PRF-83446, and MIL-PRF-39010.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business