MIL-PRF-15305F
1.2.1.1.1 Grade. The grades, including their environmental characteristics, are as follows:
Grade 1 Resistant to the moisture resistance test (see 4.6.14).
Grade 2 Resistant to the moisture resistance test (see 4.6.14).
Grade 3 For use in sealed assemblies.
1.2.1.1.2 Class. The classes of coils denoting the maximum operating temperatures (temperature rise) (see 4.6.6
and 4.6.6.1) plus maximum ambient temperature are as follows:
85°C
Class O
--------
105°C
Class A
--------
125°C
Class B
--------
>125°C
Class C
--------
1.2.1.2 Family. The family is identified by a single letter indicating its function as follows:
K -----------
Coil, radio frequency, fixed.
V -----------
Coil, radio frequency, variable
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure completeness of this list, document users are
cautioned that they must meet all specified requirement documents cited in section 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
FEDERAL STANDARDS
FED-STD-H28
- Screw-Thread Standards for Federal Services.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-202
-
Test Methods, for Electronic and Electrical Component Parts.
MIL-STD-810
-
Environmental Test Methods.
MIL-STD-1276 -
Leads, Weldable, for Electronic Component Parts.
MIL-STD-1285 -
Marking of Electrical and Electronic Parts.
(Copies of these documents are available online at https://quicksearch.dla.mil or from the Standardization Document
Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. (see
6.2).
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 10012
-
Measurement Management Systems - Requirements for Measurement Processes and
Measuring Equipment.
(Copies of this document are available online at www.iso.org or from International Organization for Standardization,
1, ch. de la Voie-Creuse, Case postale 56 - CH-1211 Geneva 20, Switzerland.)
NATIONAL CONFERENCE OF STANDARDS LABORATORIES (NCSL)
NCSL Z540.3
-
Requirements for Calibration of Measuring and Test Equipment.
(Copies of this document are available online at www.ncsli.org or from NCSL International, 1800 30th Street, Suite
305, Boulder, CO 80701-1026.)
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business